Metal Punching & Rolling2022-02-03T21:56:54+00:00

Metal Punching & Rolling Services – Serving Edmonton & Nisku

Hole punching is a shearing process that is used to create holes in material sheet and plate. Hole punching uses hardened tools with sharp edges and an applied force to shear out the unwanted material. Edvan uses a hydraulic process to punch holes in sheet and plate metal.

The rolling process is best defined as the shaping of metals into semi-finished or finished forms by passing between rollers rotating in opposite directions. Edvan can roll both pipe and plate and have utilized a bump rolling technique on our press breaks to meet customer needs as well. We are confident in delivering the required radius, circumference or arc required for your project. We also offer services for metal bending and forming.

  • Rolled plates

  • Punch Jobs

Materials We Use:

Below is a comprehensive overview of material that Edvan works with. If you do not see a type and thickness of material we can source a wide variety of material.

  • Mild Steel

  • High Tensile Steel

  • Aluminum

  • Corten Steel

  • Perforated Sheet

  • Grating

  • Checker Plate

Metal Punching & Rolling FAQ

Find answers to the most common questions we get about our metal punching and rolling services.

Which Metals Can Be Punched?2021-09-20T22:40:36+00:00

With our cutting-edge machinery we can offer punching services for almost any metals including mild and high tensile steel, aluminum, and special alloys.

Why Roll Metal?2021-09-20T22:45:04+00:00

Metal rolling offers several efficiency advantages. Operations like punching can be included in-line on a roll form set-up. Roll forms can be cut off at almost any length using the same set of tools. Material utilization is very high so waste is minimized.